G90
G43
G02
G00 X10 X20
G91
G01 X10 X20 Z30
G19
G41
G90
G90
G01 X10 X20 Z30
G43
G43
M07
M05
G43
G04
G01 X10 X20 Z30
G43
M07
G02
G18
G18
G43
G90
G41
G43
G43
G90
G90
M08
G17
G00
G00 X10 X20
G17
G00
G04
G01 X314 Y159
G18
G17
G00 X10 X20
G43
G01 X10 X20 Z30
G90
G01
G43
G01 X10 X20 Z30
G41
G01 X314 Y159
G01 X314 Y159
M09
M05
M08
G49
G01
G40
G17
G01
G00
G91
G00
M05
G90
G01 X10 X20 Z30
M09
M03
G20
G90
G17
M03
G04
M09
G41
M09
G49
G01
M05
G20
M07
G20
G40
G18
M03
G20
M07
G04
G01 X314 Y159
G00
M03
G19
M08
G41
G01 X10 X20 Z30
G91
G00
G40
G43
G19
G40
G02
G01 X314 Y159

Find out more about Hardware, Software and other

MotorLimitsEnabled

How to set Motor limits in PlanetCNC TNG software

To set your axis motor limits click: File/Settings/Motors -> “Motor Limits”. Limit- value sets limitation of motor movement in negative direction, Limit+ value sets limitation of motor movement in positive direction: To enable Motor limits for specified axis click the round button:

SettingsSPU200

How to set Steps Per Unit values in PlanetCNC TNG software

Steps per unit value (in further text SPU) defines how many step pulses controller needs to generate in order that axis moves for distance of one unit. Units can be in millimeters or in inches. SPU value depends on few factors: stepper motor, stepper drivers micro-step configuration, lead screw pitch: Motor Stepper motors usually have […]