G17
G00
G17
M09
G00
M05
G20
G41
G00 X10 X20
G91
G49
M03
G20
M03
G18
G20
G01
G01 X10 X20 Z30
G91
M08
G00
G91
G40
G20
M08
G01
G04
G49
G01 X10 X20 Z30
G17
G00 X10 X20
M05
G19
G17
M09
G00
M07
G01 X10 X20 Z30
G02
G01
G43
G04
M08
M08
G40
G91
G00 X10 X20
G02
G41
M08
G49
G18
M08
G43
G49
G90
M07
G49
G04
G01 X314 Y159
M08
G04
G17
M09
G00 X10 X20
G91
G01
G20
G02
G43
G18
M08
G91
G20
M03
G40
G18
M05
G00 X10 X20
G00
G91
G18
G04
G01 X314 Y159
M03
G18
G01 X10 X20 Z30
G02
M08
G43
M07
G01
G91
M09
M09
G02
G00 X10 X20
G41
G00 X10 X20
G00
G19

Find out more about Hardware, Software and other

NEW TNG users: List of essential PlanetCNC TNG tutorials

New to PlanetCNC TNG software? Don’t worry, here you can find list of tutorials that explain how to start using PlanetCNC TNG software as fastest and as effectively as possible. It is very recommended to follow these tutorials in chronological order: 1. PlanetCNC TNG software overview and performance guidelines Short description of PlanetCNC TNG software […]

Installing PlanetCNC TNG software on Raspberry Pi 3

You will need: – Raspberry Pi 3 Model B (or B+) – Monitor with HDMI cable – Mouse and Keyboard – Power supply – 8GB SD card (16GB and 32GB should also work, 64GB or more will not work) We used NOOBS version 2.8.2 in this tutorial but it should also work with newer versions. […]

Using ExtOut board with PlanetCNC TNG software

This tutorial will help you configure ExtOut board related settings in PlanetCNC TNG software.   ExtOut board settings are located under File/Settings/Input&Output/I2C,TX,Enc,RC. Under Ext section insert value 10000 for Frequency and enable Invert option for SEL1 Pin: Related g-codes: M64 – Output ExtOut Usage: M64 H Q <L> – H = ExtOut SSEL value (1 or 2) – […]